Terminate All Cards
To terminate all cards, perform the following procedure:
NOTE:
- A key card does not need to be present to be terminated.
- A card that is terminated may not be used again.
- Connect a scan tool to the vehicle and access SPS.
- Select the SPS application and follow the on-screen instructions.
- On the SPS Supported Controllers screen, select K183 UHF Short Range Low Energy Remote Control Access Transceiver.
- Select Key Card Learn.
- Select the Terminate Cards function.
- Follow the on-screen instructions.
- With a scan tool, clear any DTCs.
- Verify each card that was deleted is no longer paired to the vehicle. Ensure the card cannot lock or unlock the vehicle.