Locked Resistance Test
Mount starter in test bench. Follow test equipment manufacturer's instructions. With battery voltage adjusted to 4 volts, amperage draw should be as shown in specifications.
SPECIFICATIONS
| Application | Amps. | |
|---|---|---|
| Cranking Amperage Test | 180-200 | |
| Solenoid Amperage Test (6 volts@77°F) | ||
| Pull-In Circuit | 13-15 | |
| Hold-In Circuit | 8-11 | |
| No Load Amperage Test (5700 RPM Min.) | 90 | |
| Lock Resistance Amperage Test | 475-550 | |