LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1982 >> Imperial >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Fuel Control >> Testing >> Electronic Fuel Control System Tests >> Oxygen Sensor Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oxygen Sensor Test

  1. Set parking brake and connect tachometer. Run engine at 1500 RPM and connect voltmeter to carburetor-to-computer output wire (green). DO NOT ground carburetor switch. Hold choke blade closed. During the next 10 seconds, the voltage should decrease to 3 volts or less and maintain that level. If engine does not respond, proceed to step 2  ).
  2. Disconnect PCV system. During the next 10 seconds, the voltage should increase to 9 volts or greater and maintain that level until vacuum hose is reconnected. If sensor fails both tests, replace it. Reconnect all hoses and wires.
NOTE: This test should not be performed for more than 90 seconds.
scientia non olet · About LEMON Manuals