LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1983 >> E Class 2.2 C >> Repair and Diagnosis >> Engine Performance >> System >> Electronic Fuel Control System >> Spark Control Computer R & I
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Spark Control Computer R & I

NOTE: Do not remove grease from harness connectors or connector cavities in the computer. The grease is used in order to prevent moisture from corroding the terminals. If there is not at least 1/2" of grease on bottom of computer connector cavities, apply a liberal amount of Mopar multi-purpose grease No. 2932524 (or equivalent) over entire end of connector plug before reinstalling.
  1. Remove battery. Disconnect 10-wire and 6-wire connectors from computer. Remove outside air duct from computer. Disconnect vacuum hose from vacuum transducer.
  2. Remove 3 mounting screws that hold computer to fenderwell and remove computer. To install, reverse removal procedure.
NOTE: Computer is not serviceable. Do not attempt disassembly for any reason. If vacuum transducer is defective, entire computer must be replaced.
scientia non olet · About LEMON Manuals