LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1985 >> Laser Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Multi-Point >> Testing >> Entering On-Board Diagnosis
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Entering On-Board Diagnosis

  1. Attach the Chrysler Diagnostic Readout Tool (C-4805) to diagnostic connector. The connector is located in the engine compartment near the right side strut tower.
  2. If this test box is not available, codes may be read by counting the flashes of the Power Loss Lamp on the instrument panel.
  3. Start engine (if possible). Move transmission shift lever through all positions, ending in Park. Turn A/C switch on, then off (if equipped).
  4. Stop engine and, without starting it again, turn the key on, off, on, off and on. Record fault codes as displayed on Diagnostic Readout, or by counting flashes of the Power Loss Lamp.
  5. Codes displayed by the lamp are indicated by a series of flashes. For example, code 23 is displayed as flash, flash, pause, flash, flash, flash. After a slightly longer pause, any other codes stored are displayed in numerical order.
  6. The setting of a specific fault code is the result of a particular system failure, NOT a specific component. The existence of a particular code indicates the probable area of the malfunction, not necessarily the failed component itself.
scientia non olet · About LEMON Manuals