Grind Complete
WARNING: This page is about the Laser Base, Automatic, which is a different variant/trim than selected.
Includes: Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats and clean Valve Guides. Adjust Valves (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Normally Aspirated, w/Air Cond | 7.6 | A | ||
| Normally Aspirated, w/o Air Cond | 7.4 | A | ||
| Additional Procedure: VALVE: Grind Complete: | ||||
| In-Line4, Where Air Pump interferes add | 0.3 | A | ||
| Where Pwr Strg interferes add | 0.2 | A | ||
| Combination Procedure: ROCKER ARM ASSEMBLY: Disassemble & Assemble: | ||||
| In-Line4, Both | 0.7 | B | ||
| In-Line4, One Shaft | 0.5 | B | ||
| Combination Procedure: VALVE SPRING ASSEMBLED HEIGHT: Correct: | ||||
| Per 3 Springs | 0.2 | A | ||