LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1989 >> Conquest Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Basic Testing >> Ignition Checks >> Magnetic & Optical Ignition >> Power Transistor (Fuel Injected Models)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Transistor (Fuel Injected Models)

  1. Remove connector from power transistor. Using a DVOM, place positive lead of ohmmeter to terminal No. 2 and negative lead to terminal No. 3. See Figure . Ensure there is no continuity.
  2. Using a 1.5 volt dry cell battery, connect positive end of 1.5 volt battery to transistor terminal No. 1 and negative end of 1.5 volt battery to transistor terminal No. 2. Place positive lead of DVOM to terminal No. 2 and negative lead to terminal No. 3 to ensure continuity is present. If DVOM does not respond properly, replace power transistor.
scientia non olet · About LEMON Manuals