Diagnostic Procedure: Notes

WARNING: This page is about a different car, the 1993 Dodge Daytona and 1993 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding with diagnosis, certain precautions must be followed. See PRETEST INSPECTION under SELF-DIAGNOSTIC SYSTEM.

Diagnostic test procedures are designed to detect system faults as quickly as possible. Body fault codes are accessed through CCD bus diagnostic connector. See Figure . Chrysler's Diagnostic Readout Box-II (DRB-II) is used to access information from CCD bus diagnostic connector.

A 1993 diagnostic program cartridge, DRB-II, body diagnostics cable, hand-held oil pressure gauge, jumper wires, and digital volt/ohmmeter will be needed for testing. Proceed to TEST 1A: IDENTIFYING VEHICLE EQUIPMENT & SYSTEM PROBLEMS.

Ensure self-diagnostic tests apply to vehicle being tested. When system problem is identified according to customer's complaint, perform diagnostic test indicated.