LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1994 >> LHS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crankshaft Position Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Installation

  1. If old sensor is to be reused, remove old paper spacer from sensor face. Install a new paper spacer to sensor face before installing sensor. If installing a new sensor, ensure paper spacer is attached to sensor face.
  2. Install CKP sensor in transaxle. Push sensor down until paper spacer makes contact with drive plate. Hold sensor in position and tighten sensor bolt to specification. See TORQUE SPECIFICATIONS. Connect sensor wiring harness connector.
scientia non olet · About LEMON Manuals