LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1994 >> LeBaron GTC >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Body Control Computer (Convert) >> Self-Diagnostic Tests >> Test 60A - Repairing Seat Belt Lamp Problem
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 60A - Repairing Seat Belt Lamp Problem

NOTE: For connector terminal identification, see CONNECTOR  IDENTIFICATION. For wiring diagram, see WIRING DIAGRAMS  . Perform TEST VER-1 after each repair.
CAUTION: Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.

Turn ignition switch to ON position. If seat belt warning lamp is off, go to TEST 60B. If seat belt warning lamp is on, wait 10 seconds. If seat belt warning is still on, go to TEST 60C. If seat belt warning lamp goes off, system is operating properly at this time.

scientia non olet · About LEMON Manuals