Bleeding Brake System: Notes

NOTE: During bleeding procedure, ensure fluid level remains close to full. Check fluid level periodically while bleeding system. Add DOT 3 brake fluid as required.

Teves-Mark IV and Mark IV-G anti-lock brake systems must be bled as 2 independent braking systems. Always bleed base brake system using manual bleeding or pressure bleeding procedure before bleeding Hydraulic Control Unit (HCU). See MANUAL BLEEDING or PRESSURE BLEEDING. HCU must be bled separately. See BLEEDING HYDRAULIC CONTROL UNIT. Bleeding HCU requires scan tool. Always repeat base system bleeding procedure after bleeding HCU.