LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1995 >> LeBaron >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 3.0L >> Verification Tests >> Test VER-2 - Verification Procedure VER-2
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-2 - Verification Procedure VER-2

  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. If this test is being performed subsequent to a NO TROUBLE CODE test, go to next step. If this test is being performed subsequent to a TROUBLE CODE test, go to test 3).
  2. Check if initial symptom still exists. If initial or another symptom exists, repair is not complete. Check if any pertinent Technical Service Bulletins (TSBs) apply to vehicle and return to TEST NTC-1A , if necessary.
  3. If any trouble codes have not been diagnosed, go to TEST TC-1A  and finish diagnosing other trouble codes. If all trouble codes have been diagnosed, go to next step.
  4. If Powertrain Control Module (PCM) has not been changed, connect scan tool to PCM data link connector and erase trouble codes. Using scan tool, reset all values in adaptive memory. Disconnect scan tool. Go to next step.
  5. To ensure no other trouble code remains, if vehicle is equipped with A/C, turn on A/C and blower. Drive vehicle at least 5 minutes. While driving vehicle, attain a speed of 40 MPH. Ensure transmission shifts smoothly through all gears. After road test, turn engine off. Go to next step.
  6. Connect scan tool to PCM data link connector. Using scan tool, read trouble codes. If repaired trouble code has reset, repair is not complete. Go to next step.
  7. Check if any pertinent Technical Service Bulletins (TSBs) apply to vehicle and return to TEST TC-1A, if necessary. If another trouble code has set, go to TEST TC-1A . If no trouble codes are set, repair is complete.
scientia non olet · About LEMON Manuals