Test 14A - Compass Direction Reading
NOTE:
Perform TEST VER-1 after each repair.
CAUTION:
Always turn ignition off prior to disconnecting or connecting any module connector.
- Calibrate compass/temperature module using following procedure:
- Locate an area free from magnetic disturbance.
- Make 3 complete circles in vehicle without stopping.
- CAL will display during turns.
- CAL will turn off after third circle.CAUTION: Following step should be used ONLY if compass is still faulty after preceding step.
- Use a hand-held degausser to demagnetize vehicle. If compass is now correct, repairs are complete. If compass is not correct, replace compass/temperature module.