Test 32D - Dimming Interior Displays
CAUTION:
Always turn ignition off prior to disconnecting or connecting any module connector.
NOTE:
Following test sequence covers only modules on CCD bus system. Perform TEST VER-1 after each repair.
If radio display problem exists, go to TEST 32C. If instrument cluster display problem exists, replace instrument cluster. If Electronic Vehicle Information Center (EVIC) panel monitor display problem exists, replace EVIC panel monitor. If traveler display problem exists, replace traveler. If compass/temperature display problem exists, replace compass/temperature module. If no problems exist with any displays, instrument cluster is operating properly at this time.