LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1995 >> LeBaron >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Basic Testing) >> Fuel System >> Control Relay >> 2.0L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Relay: 2.0L

WARNING: This page is about a different car, the 1994 Plymouth Laser and 1994 Eagle Talon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove control relay from vehicle. Control relay is located on right side of center console. Disconnect control relay connector.
  2. While applying battery voltage to control relay terminal No. 10, ensure battery voltage is not present at terminals No. 4 and 5. See Fig 1 . While applying battery voltage to terminal No. 10 and grounding terminal No. 8, ensure battery voltage exists at terminals No. 4 and 5.
  3. While grounding terminal No. 6, ensure continuity is not present between terminals No. 2 and 3. While applying battery voltage to terminal No. 9 and grounding terminal No. 6, ensure continuity exists between terminals No. 2 and 3.
  4. Apply battery voltage to terminal No. 3. Ensure there is no voltage at terminal No. 2. While applying battery voltage to terminal No. 3 and grounding terminal No. 7, battery voltage should exist at terminal No. 2. Replace control relay if it does not test as described.
Fig 1: Control Relay Terminal ID (2.0L)
G90E06315Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals