Test 102A - Remote Keyless Entry Problem
NOTE:
For connector terminal identification and wiring diagrams, see BODY CONTROL COMPUTER
section in this article. Perform TEST VER-1
VERIFICATION TEST after each repair.
CAUTION:
Always turn ignition off prior to disconnecting any module connector.
Determine problem with Remote Keyless Entry (RKE) system and perform appropriate test listed in the DIAGNOSING RKE SYSTEM table.
DIAGNOSING RKE SYSTEM
| Complaint | Perform Test No. |
|---|---|
| All Locks Fail To Operate Correctly, and Trunk May Open Or Fail To Close On Lock Command | TEST 102B |
| Transmitter Programming | TEST 102D |
| Inoperative Or Operates Incorrectly With Known Good Transmitter | TEST 102E |
| Horn Does Not Sound (Chirp) | TEST 102F |
| Cancel Horn Chirp | TEST 102G |
| Change Rear Release To Single Button Depress | TEST 102H |