Window Switch
- Remove door trim panel. See DOOR TRIM PANEL under REMOVAL & INSTALLATION. Remove control switch from trim panel. Using ohmmeter, check continuity of switch. See appropriate POWER WINDOW SWITCH CONTINUITY CHART. See Fig 1 and Fig 2 . If switch continuity is not as specified, replace switch.
- Vehicle is equipped with an auto down feature. Driver's window can be lowered without having to hold switch in down position. Auto down feature can be activated by pressing down switch past first detent (Stop).
- To test auto down feature, operate switch in normal up and down mode. If window operates properly in normal mode, but does not operate in auto down mode, replace switch.
DRIVER'S WINDOW SWITCH CONTINUITY CHART
| Switch Position | Check Continuity Between Pins No. |
|---|---|
| OFF | 2 & 8; 3 & 8 |
| 4 & 8; 6 & 8 | |
| 7 & 8; 8 & 9 | |
| 8 & 10; 8 & 11 | |
| Driver's UP | 5 & 11; 8 & 10 |
| Right Front UP | 5 & 6; 7 & 8 |
| Left Rear UP | 3 & 8; 4 & 5 |
| Right Rear UP | 2 & 5; 8 & 9 |
| Driver's DOWN | 5 & 10; 8 & 11 |
| Right Front DOWN | 5 & 7; 6 & 8 |
| Left Rear DOWN | 3 & 5; 4 & 8 |
| Right Rear DOWN | 2 & 8; 5 & 9 |
| Window Lock | Pins 1 & 5 |
PASSENGER'S WINDOW SWITCH CONTINUITY CHART
| Switch Position | Check Continuity Between Pins No. |
|---|---|
| OFF | 2 & 5; 3 & 6 |
| UP | 3 & 6; 4 & 5 |
| DOWN | 2 & 5; 3 & 4 |