Using Scan Tool
- Ensure battery is fully charged. Turn ignition off. Connect scan tool to Data Link Connector (DLC). One connection required at 16-pin DLC. See DATA LINK CONNECTOR (DLC) table for connector location. See Fig 1.DATA LINK CONNECTOR (DLC) LOCATION
Application DLC Location LHS & New Yorker Right Of Steering Column, Next To Center Console - Turn ignition on. Using scan tool manufacturer's instructions, record all DTCs displayed on scan tool. Using all DTCs obtained, proceed to SELF-DIAGNOSTIC TESTS . Once all repairs are made, ensure DTCs are cleared from PCM. See CLEARING DIAGNOSTIC TROUBLE CODES.