Connector Identification
WARNING: This page is about a different car, the 1997 Eagle Vision, 1997 Dodge Intrepid, 1997 Chrysler LHS, and 1997 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For terminal identification of body control system connectors use illustrations. See Fig 1
-Fig 16
. Connector terminal numbers are molded into connectors. If connector terminal identification differs from that shown in figure, use wire colors to ensure correct circuit is being tested.
CONNECTOR IDENTIFICATION DIRECTORY
| Connector | See |
|---|---|
| Anti-Lock Brake Controller | Fig 1 |
| ATC Sun Sensor | Fig 2 |
| Body Control Module | Fig 3 |
| Data Link (DLC) | Fig 4 |
| Flex Fuel Module | Fig 5 |
| Fuel Pump | Fig 6 |
| Headlight Switch | Fig 7 |
| Headlight 8-Pin | Fig 8 |
| Instrument Cluster | Fig 9 |
| Junction Block (Typical, NS Body Shown) | Fig 10 |
| Message Center | Fig 11 |
| Multifunction Switch 7-Pin Connector Terminals | Fig 12 |
| Powertrain Control Module Connectors | Fig 13 |
| Relay Connector | Fig 14 |
| Remote Keyless Entry (RKE) Module | Fig 15 |
| Transmission Control Module Connector | Fig 16 |
| VTSS Indicator Light | Fig 2 |