LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1997 >> LHS >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer >> Testing >> Test 141B - Disarming VTSS System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 141B - Disarming VTSS System

NOTE: Perform TEST 141A  before proceeding with this test. For connector terminal ID, see CONNECTOR IDENTIFICATION  . For wiring schematics, see WIRING DIAGRAMS  in this article. Perform TEST VER-3A - VERIFICATION PROCEDURE  after each repair.
CAUTION: Always turn ignition off prior to disconnecting any module connector.
  1. Turn ignition switch to OFF position. Rotate key in left front door to UNLOCK position. Turn ignition switch to ON position. Using scan tool, read VTSS status. If scan tool displays CURRENT MODE DISARMED, system is functioning properly. Go to TEST 141A  . If scan tool does not display CURRENT MODE DISARMED, go to next step.
  2. Turn ignition off. Rotate key in left front door to UNLOCK position again. Turn ignition switch to ON position. Using scan tool, read VTSS status. If scan tool displays CURRENT MODE DISARMED, go to TEST 153A. If scan tool does not display CURRENT MODE DISARMED, replace Body Control Module (BCM).
scientia non olet · About LEMON Manuals