Power Window Switch
- Remove door trim panel. See DOOR TRIM PANEL
under REMOVAL & INSTALLATION. Remove control switch from trim panel. Using ohmmeter, check continuity of switch. See appropriate SWITCH CONTINUITY SPECIFICATIONS
table. See Fig 1
or Fig 2
. If switch continuity is not as specified, replace switch.
- Vehicle is equipped with an auto down feature. Driver's window can be lowered without having to hold switch in down position. Auto down feature can be activated by pressing down switch past first detent (Stop).
- To test auto down feature, operate switch in normal up and down mode. If window operates properly in normal mode, but does not operate in auto down mode, replace switch.
Courtesy of CHRYSLER CORP.
Courtesy of CHRYSLER CORP.