Manual Bleeding
- Fill master cylinder (if necessary). Reinstall master cylinder cap. Install clear hose on right rear bleed valve. Place other end of hose in clean transparent container of brake fluid. Ensure end of clear hose is submerged in brake fluid.
- Pump brake pedal 3-4 times. Hold brake pedal down. Open bleed valve at least one full turn. Brake pedal should drop to floor. Close bleed valve. Release brake pedal. Repeat bleeding procedure until brake fluid flow is clear and free of bubbles. Bleed remaining brakelines in proper sequence at each wheel. See BRAKELINE BLEEDING SEQUENCE table.
BRAKELINE BLEEDING SEQUENCE
| Application | Sequence |
|---|---|
| All Models | RR, LR, RF, LF |