Test NTC-10A - Checking Park/Neutral Position Switch

Disconnect Park/Neutral (PN) position switch connector. Using an external ohmmeter, check Park/Neutral switch sense circuit between Park/Neutral position switch and Powertrain Control Module (PCM) connector terminal No. 76. See PCM TERMINAL 76 CONNECTOR WIRE  ID table for wire color identification between PCM connector and Park/Neutral position switch connector. If resistance is less than 10 ohms, replace Park/Neutral position switch. Perform TEST VER-2A. If resistance is 10 ohms or more, repair open park/neutral position switch sense circuit. Perform TEST VER-2A.