Power Door Lock Test 11B - RKE Transmitter PROGRAMING

WARNING: This page is about a different car, the 1998 Dodge Intrepid and 1998 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform POWER DOOR LOCK TEST 11A before proceeding with this test. For connector terminal identification, refer to CONNECTOR IDENTIFICATION . For wiring diagrams, refer to WIRING DIAGRAMS . Perform, after each repair, VERIFICATION TEST VER-1A - BODY VERIFICATION TEST .

CAUTION: Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.

Ensure transmitter batteries are approximately 3.2 volts. Turn ignition on. Ensure shift lever is in Park position. Using scan tool, select MISCELLANEOUS, then PROGRAM RKE. Chime will sound. Press any button on transmitter. Chime will sound. Press any button on next transmitter. Chime will sound. Repeat procedure for additional transmitters. Exit PROGRAM RKE and turn ignition off. Chime will sound.