Connector Identification
WARNING: This page is about a different car, the 1998 Dodge Intrepid and 1998 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For terminal identification of body control system connectors, use following illustrations. See Fig 1
-Fig 19
. Connector terminal numbers may be molded into connectors. If connector terminal identification differs from that shown in figure, use wire colors to ensure correct circuit is being tested.
CONNECTOR IDENTIFICATION DIRECTORY
| Connector | See | |
|---|---|---|
| ABS Controller | See Fig 1 | |
| Air Bag Control Module | See Fig 2 | |
| ATC Module | See Fig 3 | |
| ATC Sun Sensor/VTSS Indicator | See Fig 4 | |
| Body Control Module | ||
| "C1" 14-Pin (Gray) | See Fig 5 | |
| "C2" 24-Pin (Black) | See Fig 6 | |
| "C3" 12-Pin (Bone) | See Fig 7 | |
| "C4" 16-Pin (Blue) | See Fig 8 | |
| Data Link (DLC) | See Fig 9 | |
| Door Lock Motor/Ajar Switch | See Fig 10 | |
| Fuel Pump | See Fig 11 | |
| Headliner | See Fig 12 | |
| Instrument Cluster | See Fig 13 | |
| Multifunction Switch 7-Pin | See Fig 14 | |
| OTIS Module | See Fig 15 | |
| Relay (Typical) | See Fig 17 | |
| Transmission Control Module Connector | See Fig 18 | |
| Wiper Motor | See Fig 19 | |