LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1997 >> Sebring LXi >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures >> Relearn Procedures >> Computer Relearn Procedures >> Theft Alarm Relearn Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Theft Alarm Relearn Procedure

  1. Theft alarm relearn is necessary whenever battery is disconnected or dead battery is boosted. If battery is connected or boosted without conducting relearn procedure, alarm system will enter power-up mode and vehicle will not start.
  2. Before reconnecting battery or connecting booster, insert door key into driver side door lock. Connect battery cable(s) and cycle driver side door lock once. Vehicle may now be started. On some models, horn will sound 3 times to indicate theft system is activated.
NOTE: If Single Board Engine Controller or Powertrain Control Module (SBEC or PCM) is replaced, theft alarm system will not operate for minimum of 20 engine starts.
scientia non olet · About LEMON Manuals