RKE Transmitter Programming

NOTE: Perform POWER DOOR LOCK TEST 11A before proceeding with this test. For connector terminal identification and wiring diagrams, see BODY CONTROL COMPUTER - INTRODUCTION article. Perform VERIFICATION TEST: VER-2A after each repair.

CAUTION: Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.

Ensure transmitter batteries are approximately 3.2 volts. Turn ignition on. Ensure shift lever is in Park position. Using scan tool, select MISCELLANEOUS, then PROGRAM RKE. Chime will sound. Press any button on transmitter. Chime will sound. Press any button on next transmitter. Chime will sound. Repeat procedure for additional transmitters. Exit PROGRAM RKE and turn ignition off. Chime will sound.