Fluid Capacities (Neon)

FLUID CAPACITIES (NEON)

Application

⁽¹⁾ Quantity

Crankcase (Includes Filter) ⁽²⁾

2.0L DOHC & SOHC

4.5 Qts. (4.3L)

Cooling System ⁽³⁾

2.0L DOHC & SOHC

With A/C

7.0 Qts. (6.5L)

Without A/C

6.5 Qts. (6.1L)

Automatic Transaxle (Mopar ATF Plus Type 7176)

Drain & Refill

⁽⁴⁾ 4.0 Qts. (3.8L)

Dry Refill

8.9 Qts. (8.4L)

Manual Transaxle ⁽⁵⁾

2.1 Qts. (1.9L)

Power Steering Fluid ⁽⁶⁾

1.0 Qt. (.95L)

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Use an API energy conserving engine oil that is certified for gasoline engines.

⁽³⁾	Quantity includes heater and coolant recovery tank.

⁽⁴⁾

Add this amount of fluid. Start engine and shift transaxle through all gears and back to Park. Add additional fluid to bring fluid level to 1/8" below the ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level so fluid level is within the HOT range on dipstick.

⁽⁵⁾	Use only Mopar MS9417 manual transaxle fluid.

⁽⁶⁾	Use only Mopar power steering fluid. DO NOT use automatic transmission fluid.