Test VER-4A: Speed Control Verification: Notes
NOTE:
If Powertrain Control Module (PCM) was replaced, the correct vehicle mileage and Vehicle Identification Number (VIN) must be programmed into the PCM to prevent DTCs from being set in Anti-Lock Brake System (ABS) module and Supplemental Restraint System (SRS) module. To program PCM and clear DTCs from ABS and SRS modules, proceed to appropriate procedure. On models equipped with Sentry Key Immobilizer Module (SKIM), if replacing PCM, the sentry key data must also be updated to enable engine starting. To update sentry key data, proceed to appropriate procedure.