LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Programming >> Sentry Keys >> Customer Learn Method
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customer Learn Method

NOTE: If no sentry keys have been previously programmed, scan tool method must be used to program the first 2 keys into system. See SCAN TOOL METHOD  . The following steps must be completed in proper order. SKIS will automatically exit CUSTOMER LEARN programming mode if time allotted is exceeded, or if 8 keys have already been programmed.
  1. Obtain 2 programmed sentry keys from owner. Ensure new sentry key blank is cut before proceeding. Insert one of the 2 valid sentry keys into ignition. Turn ignition on.
  2. After 3 seconds, but no more than 15 seconds, turn ignition off. Remove key. Insert second valid sentry key. Turn ignition on.
  3. About 10 seconds after completion of step 2)  , VTSS LED indicator will flash and a single tone will be heard. This indicates system has entered customer learn programming mode.
  4. Within 50 seconds, turn ignition off. Remove valid sentry key. Insert blank sentry key. Turn ignition on. After about 10 seconds, a single tone will be heard. VTSS LED indicator will stop flashing and stay on for about 3 seconds to indicate sentry key has been successfully programmed.
  5. SKIS will return to normal operation immediately following exit from customer learn programming mode. Repeat procedure for each additional sentry key to be programmed.
scientia non olet · About LEMON Manuals