Courtesy Lights Inoperative With Door Open (Door Lights Only)
- Turn ignition off. Disconnect driver's door light harness connector. Measure voltage at terminal No. 2 (Pink wire) at driver's door light harness connector. If battery voltage exists, go to next step. If battery voltage does not exist, repair open in Pink wire between junction block and courtesy lights.
- Connect driver's door light harness connector. Disconnect junction block harness connector C6. See Figure . Using a fused jumper wire, ground terminal No. 8 (Yellow wire) at junction block harness connector C6. If door courtesy lights illuminate, replace junction block. If door courtesy lights do not illuminate, repair open in Yellow wire between junction block and courtesy door lights.