LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Memory Systems >> Memory Position No. 2 Stuck
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Memory Position No. 2 Stuck

  1. Turn ignition off. Disconnect memory set switch harness connector. Connect scan tool to Data Link Connector (DLC). Using scan tool, check memory position 2 status. If OPEN is not displayed, go to next step. If OPEN is displayed, replace memory set switch.
  2. Turn ignition off. Disconnect Memory Heated Seat/Mirror Module (MHSMM) harness connector C1. Measure resistance between ground and terminal No. 4 (Pink/White wire) at memory set switch harness connector. See Figure . If resistance is greater than 1000 ohms, replace MHSMM. If resistance is 1000 ohms or less, repair short to ground in Pink/White wire between memory set switch and MHSMM.
scientia non olet · About LEMON Manuals