LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Power Door Locks/RKE System >> RKE Horn Chirp Inoperative
April 5, 2026: LEMON Manuals is launched! Read the announcement.

RKE Horn Chirp Inoperative

  1. Press horn pad on steering wheel. If horn is operating properly, go to next step. If horn does not operate properly, repair horn as necessary. See appropriate STEERING COLUMN SWITCHES article.
  2. Turn ignition off. Connect scan tool to Data Link Connector (DLC). Turn ignition on. Using scan tool, check horn chirp status. If ENABLED is displayed, go to next step. If ENABLED is not displayed, enable horn chirp using scan tool.
  3. Turn ignition off. Disconnect Body Control Module (BCM) from back of junction block. Using a fused jumper wire, momentarily ground terminal No. 18 at BCM connector on back of junction block. See Figure . If horn sounds, replace BCM. If horn does not sound, replace junction block.
scientia non olet · About LEMON Manuals