LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Windshield Wiper System >> Wiper No Wiper After Wash
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wiper No Wiper After Wash

  1. Turn ignition on. Operate wipers in all speeds and operate washer pump. If wipers and washer pump operate properly, go to next step. If wipers and washer pump do not operate properly, repair wipers and washer as necessary.
  2. Turn wipers off. Turn ignition off. Disconnect Body Control Module (BCM) harness connector C2. Turn ignition on. Connect a test light between ground and terminal No. 7 (Brown wire) at BCM harness connector C2. See Figure . Operate washers while observing test light. If test light illuminates, replace BCM. If test light does not illuminate, repair open in Brown wire between wiper/washer switch and BCM.
scientia non olet · About LEMON Manuals