General Information

If PCM is replaced, unique secret key data must be transferred from SKIM to PCM. This procedure requires SKIM to be placed in SECURED ACCESS mode using 4-digit PIN code.

If PCM and SKIM are replaced at the same time, program VIN into PCM first. All vehicle keys will need to be replaced and programmed into new SKIM.

SECURED ACCESS mode is not required to check programmed status of key.

If 3 attempts are made to enter secured access mode using an incorrect PIN code, SECURED ACCESS mode will be locked out for one hour. To exit lock out mode, turn ignition switch to on position continuously for one hour then enter the correct PIN code. Ensure all accessories are turned off. Monitor battery state and connect battery charger is necessary.

To program smart keys using "customer programming method" requires 2 valid smart keys. See CUSTOMER LEARN PROGRAMMING METHOD  .