Fluid Capacities (CONCORDE, Intrepid, LHS & 300M)

FLUID CAPACITIES (CONCORDE, INTREPID, LHS & 300M)

Application

⁽¹⁾ Quantity

Crankcase (Includes Filter) ⁽²⁾

2.7L, 3.2L & 3.5L

5.0 Qts. (4.7L)

Cooling System ⁽³⁾

2.7L, 3.2L & 3.5L

9.4 Qts. (8.9L)

Automatic Transaxle ⁽⁴⁾

Drain & Refill

⁽⁵⁾ 4.5 Qts. (4.3L)

Dry Refill

9.9 Qts. (9.4L)

Differential ⁽⁶⁾

1.0 Qt. (.95L)

Power Steering Fluid ⁽⁷⁾

⁽⁸⁾

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Use an API energy conserving engine oil that is certified for gasoline engines. Use 5W-30 (preferred) or 10W-30.

⁽³⁾	Quantity includes heater and coolant recovery tank.

⁽⁴⁾	Use Mopar® ATF+4, Type 9602.

⁽⁵⁾

Add this amount of fluid. Start engine and shift transaxle through all gears and back to Park. Add additional fluid to bring fluid level to 1/4" above the bottom hole on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level so fluid level is within the HOT range on dipstick.

⁽⁶⁾	Differential has a separate sump from the automatic transaxle. Use Mopar® 75W-90 hypoid gear oil. DO NOT use synthetic gear oil in differential.

⁽⁷⁾	Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid.

⁽⁸⁾	Capacity is not available from manufacturer.