LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Power Distribution System) >> Junction Block >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Junction Block: Installation

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install Junction Block/BCM to vehicle.
  2. Connect BCM wire connectors and RKE antenna connector.
  3. Install Junction Block/BCM.
  4. Install wire harness connectors to Junction Block/BCM.
  5. Install four mounting screws.
  6. Install under column ducts.
  7. Install left knee blocker.
  8. Connect cable to hood release, decklid release switch wiring, and install two screws to lower instrument panel.
  9. Install left end cap.
  10. Connect the negative battery cable remote terminal to the remote battery post.
scientia non olet · About LEMON Manuals