LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Fuel Injection System) >> Fuel Injector >> Installation >> Installation - 3.5L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation - 3.5L

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
  2. Install retaining clips on fuel injectors.
  3. Push injectors into fuel injector rail until clips are in the correct position.
  4. Position fuel rail over cylinder head, and push rail into place. Tighten fuel rail mounting bolts to 28 N.m (250 in.lbs.) torque.
  5. Connect fuel supply tube quick connect fittings at the rear of the fuel rail. Refer to QUICK CONNECT FITTING .
  6. Connect electrical connectors to fuel injectors.
  7. Install intake manifold plenum. Refer to the ENGINE 3.5L for information.
  8. Connect the battery cable.
scientia non olet · About LEMON Manuals