Throttle Control Cable: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- From the engine compartment, push the housing end fitting into the dash panel grommet.
- Install the cable housing (throttle body end) into the cable mounting bracket on the engine.
- From inside the vehicle, hold up the pedal and install throttle cable and cable retainer in the upper end of the pedal shaft (Figure).
- At the dash panel, install the cable retainer clip between the end of the throttle cable fitting and grommet (Figure).
- From the engine compartment, rotate the throttle lever to wide open and install the throttle cable.