LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body Control Modules) >> Removal & Installation >> Mode Door Actuator >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mode Door Actuator: Installation

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the wire harness connector to the mode door actuator. Install the mode door actuator on the HVAC housing, making sure its keyed shaft is positioned properly. Install the 3 fastener screws and tighten.
  2. Reposition the center support bracket and install fastener. Install the rear seat heat forward adaptor duct. Install the center floor heat adaptor duct.
  3. Install the floor console. Install the left and right underpanel ducts. Connect the negative battery cable remote terminal to the remote battery post.
scientia non olet · About LEMON Manuals