Driver Door Fails To Lock From Any Switch
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After making any repairs, perform BODY VERIFICATION TEST
under VERIFICATION TESTS.
Possible Causes:
- Driver Door Unlock Relay Ground Circuit Open
- Driver Door Unlock Relay
Testing
- Remove driver door unlock relay from junction block. See Figure and Figure . Measure resistance between ground and driver door unlock relay connector terminal No. 89. If resistance is less than 5 ohms, replace driver door unlock relay. If resistance is 5 ohms or more, replace junction block. See JUNCTION BLOCK under REMOVAL & INSTALLATION.