Remote Keyless Entry Problem
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After making any repairs, perform BODY VERIFICATION TEST
under VERIFICATION TESTS.
Possible Causes:
- Reprogram Key Fobs
- Testing The Remote Keyless Entry Module
Testing
- Obtain known good Remote Keyless Entry (RKE) transmitter. Turn ignition off. Connect scan tool to Data Link Connector (DLC). Using scan tool, program RKE transmitter. See REMOTE KEYLESS ENTRY TRANSMITTER under PROGRAMMING. Press lock or unlock button on RKE transmitter. If RKE system responds correctly, replace and program new transmitter. If RKE system is inoperative or does not operate correctly, replace RKE module and program all transmitters to be used with vehicle. See REMOTE KEYLESS ENTRY SYSTEMS - CONCORDE, INTREPID & 300M article.