Removal (2.7L)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable.
- Remove speed control cable from throttle cam by sliding clasp out hole used for throttle cable.
- Compress the retaining tabs on the cable and slide cable out of bracket.
- Remove 2 nuts and one bolt from servo bracket.
- Disconnect electrical connectors and vacuum hose.
- Remove 2 nuts attaching speed control cable and mounting bracket to servo.
- Pull cable away from servo to expose retaining clip and remove clip attaching cable to servo.
- Remove servo mounting bracket.