Power Mirror Switch
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Remove power mirror switch. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Using a DVOM, check continuity between specified power mirror switch connector terminals (switch side) with switch in appropriate position. See POWER MIRROR SWITCH CONTINUITY TEST table. See Fig 1 . If continuity does not exist, replace switch.
POWER MIRROR SWITCH CONTINUITY TEST
| Mirror Selector Position | Continuity Between Terminals No. | |
|---|---|---|
| "L" (Left) | ||
| Up | 1 & 9; 11 & 12; 12 & 13 | |
| Down | 1 & 11; 9 & 12; 9 & 13 | |
| Left | 1 & 9; 7 & 11; 8 & 11 | |
| Right | 1 & 11; 7 & 9; 8 & 9 | |
| "R" (Right) | ||
| Up | 2 & 9; 11 & 12; 11 & 13 | |
| Down | 6 & 11; 9 & 12; 9 & 13 | |
| Left | 6 & 9; 7 & 11; 8 & 11 | |
| Right | 6 & 11; 7 & 9; 8 & 9 | |