Overhead Console: Installation
WARNING: This page is about a different car, the 2003 Chrysler Concorde, 2003 Chrysler 300M, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Position the overhead console in the vehicle and connect the wire harness connectors.
- Connect the control module, courtesy lights and the power sunroof switch electrical connector.
- Using your fingertips, grasp the sides of the overhead console and push straight up evenly to engage the 2 snap clips at the rear of the unit.
- Install the overhead console retaining screw, located in the front of console near the windshield and tighten. See TORQUE SPECIFICATIONS .
- Reconnect the remote negative battery cable.