Starter Motor: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, 2004 Chrysler 300M, and 2003 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
- Connect battery positive feed wire to starter.
- Connect posi-lock starter solenoid connector.
- Jack engine up slightly to give more room to maneuver starter assembly.
- Install the starter.
- Install three bolts attaching starter to engine See Figure . . Tighten all fasteners to the proper torque. Refer to the Torque Specifications chart in this section.
- Install three left engine mount mounting bolts to engine block.
- Install starter solenoid assembly from transmission housing. Position the starter to gain access to the Connector Positive Assurance (CPA) wiring connector.
- Lower vehicle.
- Connect the battery negative cable See Figure .