Body Control Module: Removal

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

Remove the junction Block/BCM from the vehicle.
Remove the four BCM attaching screws from the junction Block.
Disconnect BCM form the junction block.

NOTE: The Remote Keyless Entry (RKE) module is attached to the BCM with three screws. this must be transferred (if equipped) to the new BCM.

NOTE: If the BCM is replaced, the vehicle theft/security system (VTSS (if equipped) must be enabled in the new BCM via the DRB III(R) scan tool in order to start the vehicle.