Obtaining DTC'S Using DRB Scan Tool

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

Connect the DRB scan tool to the data link (diagnostic) connector. This connector is located in the passenger compartment; at the low edge of instrument panel; near the steering column.
Turn the ignition switch on and access the "read Fault" screen.
Record all the DTC'S and "freeze frame" information shown on the DRB scan tool.
To erase DTC'S, use the "Erase Trouble Code" data screen on the DRB scan tool. Do not erase any DTC's until problems have been investigated and repairs have been performed.