LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Electronic Control Modules) >> Body Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Junction Block/BCM from the vehicle. Refer to JUNCTION BLOCK .
  2. Remove the four BCM attaching screws from the Junction Block.
  3. Disconnect BCM from the Junction Block.
    NOTE: The Remote Keyless Entry (RKE) module is attached to the BCM with three screws. This must be transferred (if equipped) to the new BCM.
    NOTE: If the BCM is replaced, the Vehicle Theft /Security System (VTSS (if equipped) must be enabled in the new BCM via the DRB III(R) scan tool in order to start the vehicle.
scientia non olet · About LEMON Manuals