LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Battery System) >> Battery HOLDDOWN >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Battery HOLDDOWN: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the ignition switch and all accessories are OFF.
  2. Turn the steering wheel to the full right position.
  3. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
  4. Remove the air cleaner housing. Refer to ENGINE 3.5L .
  5. Remove battery splash shield.
  6. Remove the two short bolts from the battery hold down and remove the hold down.
scientia non olet · About LEMON Manuals